Reference Guide

726 | PIM Sparse-Mode
www.dell.com | support.dell.com
To clear tree information learned through PIM-SM snooping from the PIM TIB, enter the clear ip pim
snooping tib command.
To clear information on the multicast routes learned through PIM-SM snooping from the IPv4 multicast
snooping table, enter the
clear ip mroute snooping command.
The following examples show the PIM-SM snooping output displayed for these
show commands.
PIM-SM snooping: show ip pim snooping neighbor
FTOS#show ip pim snooping neighbor
Neighbor Interface Uptime/Expires Ver DR Prio
Address
165.87.32.2 Vl 2 [Gi 4/13 ] 00:04:03/00:01:42 v2 1
165.87.32.10 Vl 2 [Gi 4/11 ] 00:00:46/00:01:29 v2 0
165.87.32.12 Vl 2 [Gi 4/20 ] 00:00:51/00:01:24 v2 0
PIM-SM snooping: show ip pim snooping tib
FTOS#show ip pim snooping tib
PIM Multicast Snooping Table
Flags: J/P - (*,G) Join/Prune, j/p - (S,G) Join/Prune
SGR-P - (S,G,R) Prune
Timers: Uptime/Expires
* : Inherited port
(*, 225.1.2.1), uptime 00:00:01, expires 00:02:59, RP 165.87.70.1, flags: J
Incoming interface: Vlan 2, RPF neighbor 0.0.0.0
Outgoing interface list:
Display information about the VLAN interfaces
on which PIM-SM snooping is configured.
show ip pim snooping interface [vlan
vlan-id]
PIM-SM snooping: show ip pim snooping
interface
EXEC Privilege
Display information about the current operation
of PIM-SM snooping globally on the switch or
on a specified VLAN.
show ip pim summary
PIM-SM snooping: show ip pim summary
EXEC Privilege
VLAN INTERFACE
Display information on the multicast routes
discovered on VLANs configured for PIM-SM
snooping.
show ip mroute snooping [vlan vlan-id]
[group-address [source-address]]
PIM-SM snooping: show ip mroute
snooping
EXEC Privilege
Display information about the current
configuration of PIM-SM snooping on the
switch.
show running-config pim
PIM-SM snooping: show running-config
EXEC Privilege
Display the current configuration of PIM-SM
snooping on a VLAN.
show configuration
PIM-SM snooping: show configuration
VLAN INTERFACE
Task Command Command Mode