Reference Guide

692 | Open Shortest Path First (OSPFv2 and OSPFv3)
www.dell.com | support.dell.com
Redistribute routes
You can add routes from other routing instances or protocols to the OSPFv3 process. With the redistribute
command syntax, you can include RIP, static, or directly connected routes in the OSPF process.
Configure a default route
Configure FTOS to generate a default external route into the OSPFv3 routing domain.
Command Syntax Command Mode Usage
redistribute {bgp |
connected | static} [metric
metric-value | metric-type
type-value] [route-map
map-name] [tag tag-value]
CONF-IPV6-ROUTER-OSPF Specify which routes will be redistributed into OSPF
process. Configure the following required and
optional parameters:
• bgp, connected, or static: enter one of the
keyword to redistribute those routes.
• metric metric-value range: 0 to 4294967295.
• metric-type metric-type: 1 for OSPFv3 external
route type 1 OR 2 for OSPFv3 external route type
2.
• route-map map-name: enter a name of a
configured route map.
• tag tag-value range: 0 to 4294967295.
Command Syntax Command Mode Usage
default-information originate
[always [metric metric-value]
[metric-type type-value]]
[route-map map-name]
CONF-IPV6-ROUTER-OSPF Specify the information for the default route.
Configure the following required and optional
parameters:
• always: indicate that default route information
must always be advertised
• metric metric-value range: 0 to 4294967295.
• metric-type metric-type: 1 for OSPFv3
external route type 1 OR 2 for OSPFv3
external route type 2.
• route-map map-name: enter a name of a
configured route map.