Reference Guide

Object Tracking | 653
Command Example: track ip route metric threshold
FTOS(conf)#track 6 ip route 2.1.1.0/24 metric threshold
FTOS(conf-track-6)#delay down 20
FTOS(conf-track-6)#delay up 20
FTOS(conf-track-6)#description track ip route metric
FTOS(conf-track-6)#threshold metric down 40
FTOS(conf-track-6)#threshold metric up 40
FTOS(conf-track-6)#exit
FTOS(conf)#track 10 ip route 3.1.1.0/24 metric threshold vrf vrf1
Command Example: track ipv6 route metric threshold
FTOS(conf)#track 8 ipv6 route 2::/64 metric threshold
FTOS(conf-track-8)#threshold metric up 30
FTOS(conf-track-8)#threshold metric down 40
Displaying Tracked Objects
You can display the currently configured objects used to track Layer 2 and Layer 3 interfaces, and IPv4
and IPv6 routes, by entering the following
show commands:
•
show track [object-id [brief] | interface [brief] [vrf vrf-name] | ip route [brief] [vrf vrf-name] | resolution
| vrf vrf-name [brief] | brief]
Use the show track command to display the configuration and status of currently tracked Layer 2 or
Layer 3 interfaces, IPv4 or IPv6 routes, or a VRF instance. You can also display the currently config-
ured per-protocol resolution values used to scale route metrics when tracking metric thresholds.
5 (Optional) Configure the metric
threshold for the UP and/or
DOWN routing status to be
tracked for the specified route.
threshold metric {[up number] [down
number]}
Default UP threshold: 254. The routing state is UP if
the scaled route metric is less than or equal to the UP
threshold.
Default DOWN threshold: 255. The routing state is
DOWN if the scaled route metric is greater than or
equal to the DOWN threshold.
OBJECT
TRACKING
6 (Optional) Display the tracking
configuration.
show track object-id EXEC Privilege
Step Task Command Syntax Command Mode