Reference Guide

IPv6 Addressing | 493
Show an IPv6 Interface
View the IPv6 configuration for a specific interface with the following command.
FTOS#show ipv6 ?
accounting IPv6 accounting information
cam linecard IPv6 CAM Entries for Line Card
fib linecard IPv6 FIB Entries for Line Card
interface IPv6 interface information
mbgproutes MBGP routing table
mld MLD information
mroute IPv6 multicast-routing table
neighbors IPv6 neighbor information
ospf OSPF information
pim PIM V6 information
prefix-list List IPv6 prefix lists
route IPv6 routing information
rpf RPF table
FTOS#
Command Syntax Command Mode Purpose
show ipv6 interface type {slot/
port}
EXEC Show the currently running configuration for the specified
interface
Enter the keyword interface followed by the type of
interface and slot/port information:
• For all brief summary of IPv6 status and configuration ,
enter the keyword brief.
• For all IPv6 configured interfaces, enter the keyword
configured.
• For a 10/100/1000 Ethernet interface, enter the
keyword GigabitEthernet followed by the slot/port
information.
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a 10 Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a loopback interface, enter the keyword loopback
followed by the loopback number
• For a linecard interface, enter the keyword linecard
followed by the slot number
• For a port-channel interface, enter the keyword
port-channel followed by the port-channel number
• For a VLAN interface, enter the keyword vlan
followed by the VLAN ID
Command Syntax Command Mode Purpose