Reference Guide

Force10 Service Agent | 359
FTSA Policy Sample Configurations
Line card state-change policy configuration
The following FTSA policy configuration uses the default test list hardware, which contains a
line-card-state-change condition, and the default action list hardware plus the custom action show linecard
4 | grep Status. Linecard 4 is then taken offline to trigger a match against the card-state-change test
condition.
Configuring an FTSA Policy for a Linecard Down
call-home
admin-email [e-mail]
smtp server-address 192.168.1.1
no enable-all
server FTOS
recipient [e-mail]
keyadd Force10DefaultPublicKey
no encrypt
enable
log-messages delay 60 severity 6
policy lcdown
action-list lcdown
test-list lcdown
policy-test-list lcdown
default-test hardware
policy-action-list lcdown
default-action hardware
no log-only
message-format text
cli-show "show linecard 4 | grep Status" repeat 1 delay 1
System Log Messages during an a Linecard Down with FTSA
R6_E300(conf-callhome)#do offline linecard 4
2d9h24m: %RPM0-P:CP %CHMGR-2-CARD_DOWN: Line card 4 down - card offline
2d9h24m: %RPM0-P:CP %IFMGR-1-DEL_PORT: Removed port: Gi 4/0-47
R6_E300(conf-callhome)#2d9h24m: %RPM1-S:CP %IFMGR-1-DEL_PORT: Removed port: Gi 4/0-47
2d9h24m: %RPM0-P:CP %CALL-HOME-6-CALLHOME: Call-home executes remote exec command
2d9h24m: %RPM0-P:CP %CLI-0-REMOTE-EXEC: remote-exec CP: dhsTestCp
2d9h25m: %RPM0-P:CP %CALL-HOME-6-CALLHOME: Call-home executes remote exec command
2d9h25m: %RPM0-P:CP %CLI-0-REMOTE-EXEC: remote-exec CP: dhsTestCp
2d9h25m: %RPM0-P:CP %CALL-HOME-HELPER-3-CALLHOME: Callhome service sent a message to
FTOS at [e-mail]
FTSA Type 5 Message for a Linecard Down Policy
--------------------------------Message Body------------------------------------------
<AgentInfo>
<messagetype>Type - 5</messagetype>
<time>23:19:37.209 UTC Wed Feb 25 2009</time>
<serialnum>0036232 </serialnum>
<hostname>R6_E300</hostname>