Reference Guide

Dynamic Host Configuration Protocol | 313
Specify a Default Gateway
The IP address of the default router should be on the same subnet as the client.
Enable DHCP Server
This feature is available on c and s (S25/S50) platforms only.
The DHCP server is disabled by default.
In Figure 16-3, an IP phone is powered by PoE and has acquired an IP address from the Dell Force10
system, which is advertising LLDP-MED. The leased IP address is displayed using
show ip dhcp binding,
and confirmed with
show lldp neighbors.
Figure 16-3. Configuring DHCP Server
Task Command Syntax Command Mode
Specify default gateway(s) for the clients on the subnet, in order of preference. default-router address DHCP <POOL>
Step Task Command Syntax Command Mode
1 Enter the DHCP command-line context. ip dhcp server CONFIGURATION
2 Enable DHCP server. no disable
Default: Disabled
DHCP
3 Display the current DHCP configuration.
show config
DHCP
7/1
Relay Agent
DNS Serve
r