Reference Guide

E-Series TeraScale Debugging and Diagnostics | 1093
FTOS#show processes memory lp 9
Total: 197534888, MaxUsed: 112999116, CurrentUsed: 87782876, CurrentFree:
109752012
TaskName TotalAllocated TotalFreed MaxHeld CurrentHolding
ppdT2lSramP 25169040 25165840 25169040 3200
Recognize a transient parity error
FTOS generates a message similar to Message 10 and Message 11 when it encounters a phantom or
recoverable transient parity error.
The line card status does not reflect transient errors until FTOS encounters five recoverable or 50 phantom
transient errors on a card within an hour, as shown in the following example. The text “Last Event”
indicates the last type of parity error (transient or real) that occurred.
Use SNMP to poll the number of transient errors using the objects chSysCardParityPhantomError and
chSysCardParityRecoverableError. If it has been more than one hour since the last occurrence of the same
type of error, the counter associated with that type of error is reset to 1.
FTOS#show linecard 6
-- Line card 6 --
Status : online
Next Boot : online
Required Type : E48TF - 48-port 10/100/1000Base-T line card with RJ-45 interfaces (EF)
Current Type : E48TF - 48-port 10/100/1000Base-T line card with RJ-45 interfaces (EF)
Hardware Rev : Base - 1.1 PP0 - 1.0 PP1 - 1.0
Num Ports : 48
Up Time : 3 min, 44 sec
FTOS Version : 6.5.4.1
Message 8 Parity Error Correction Enabled
%RPM0-P: CP %CHMGR-5-PARITY_CORRECTION: FPC parity correction feature will be on next
reload.
Message 9 Parity Error Correction Enabled
[1/1 0:0:25] LCMGR-(lcMgr):lcMgrSetParityCorrection(): Enable parity correction
[5/15 16:13:14] LCMGR-(lcMgr):lcMgrSetParityCorrection(): Disable parity correction
Message 10 Console Phantom Transient Parity Error Message
Apr 29 18:01:24: %EXW16PG:6 %POLLMGR-5-FPC_NOTIFY: Line card detected FPC 6 parity -
Transient phantom
Message 11 Console Recoverable Transient Parity Error Message
Apr 29 18:01:05: %EXW16PG:6 %POLLMGR-5-FPC_NOTIFY: Line card detected FPC 6 parity -
Transient recoverable