Reference Guide

E-Series ExaScale Debugging and Diagnostics | 1579
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
show logging driverlog
e
x
Display the driver log for the RPM CP processor or for the line card CPU in the specified slot.
Syntax
show logging driverlog [linecard number]
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
rpm-switch Enter the keyword rpm-switch to display the RPM Switch’s IPC related
information.
counters (OPTIONAL) Enter the keyword counters to display the IPC counters.
drops (OPTIONAL) Enter the keyword drops to display IPC drop-related error
counters.
configuration (OPTIONAL) Enter the keyword configuration to display the
RP-Switch related IPC configuration.
qos-counters (OPTIONAL) Enter the keyword qos-counters to display the
RP-Switch qos-counters.
qos-configuration (OPTIONAL) Enter the keyword qos-configuration to display the
RP-Switch qos-configuration.
cp-port (OPTIONAL) Enter the keyword cp-port to display the RP-Switch
information for the CP port.
rp1-port (OPTIONAL) Enter the keyword rp1-port to display the RP-Switch
information for the RP1 port.
rp2-port (OPTIONAL) Enter the keyword rp2-port to display the RP-Switch
information for the CRP2 port.
lc-switch (OPTIONAL) Enter the keyword lc-switch to display the counter
information for the LC-Switch.
peer-rpm (OPTIONAL) Enter the keyword peer-rpm to display information for
the peer RPM.
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i
linecard number (OPTIONAL) Enter the keyword linecard followed by the line card slot number
to display the driver log for the specified line card.
Range: 0 to 13 on a E1200, 0 to 6 on a E600/E600i, and 0 to 5 on an E300