Reference Guide

Control and Monitoring | 115
Example 1
Figure 5-25. Example output of show inventory for S-Series
Example 2
Figure 5-26. Example Output of show inventory media (S-Series)
Related
Commands
show linecard
c e
Display the line card(s) status.
Syntax
show linecard [number [brief] | all]
Parameters
Force10#show inventory
System Name : S50v
system Mode : 1.0
Software Version : 7.6.1.0a
Unit Type Serial Number Part Number Revision
--------------------------------------------------------------
0 *S50-01-GE-48T-V DL267050013 7590003600 B
0 S50-01-10GE-2C N/A N/A N/A
0 S50-PWR-AC N/A N/A N/A
0 S50-FAN N/A N/A N/A
* - Management Unit
Software Protocol Configured
--------------------------------------------------------------
IGMP
PVST
RSTP
SNMP
Force10#
S50V_7.7#show inventory media ?
<0-7> Slot number
| Pipe through a command
<cr>
S50V_7.7#show inventory media
Slot Port Type Media Serial Number F10Qualified
------------------------------------------------------------------------------
0 49 Media not present or accessible
0 50 XFP 10GBASE-SR C707XS0MD Yes
0 45 Media not present or accessible
0 46 Media not present or accessible
0 47 Media not present or accessible
0 48 Media not present or accessible
0 51 Media not present or accessible
0 52 Media not present or accessible
S50V_7.7#
show interfaces interface configuration.
show interfaces
transceiver
Display the physical status and operational status of an installed transceiver. The
output also displays the transceiver’s serial number.
number
(OPTIONAL) Enter a slot number to view information on the line card in that slot.
C-Series Range: 0-7
E-Series Range: 0 to 13 on a E1200, 0 to 6 on a E600, and 0 to 5 on a E300.