Command Line Reference Guide

Content Addressable Memory (CAM) for ExaScale | 421
13
Content Addressable Memory (CAM) for
ExaScale
Overview
This chapter discusses CAM commands for the E-Series ExaScale e
x
platform. Refer to
Chapter 14, Content Addressable Memory (CAM) for information on the commands for the E-Series
TeraScale platform
Commands
This chapter includes the following commands:
• cam-profile template [10M-CAM]
• enable
• flow
• layer-2
• layer-3
• microcode
• show cam-profile
• test cam-profile
Warning: If you are using these features for the first time, contact the Dell Force10
Technical Assistance Center (TAC) for guidance. For information on contacting Dell
Force10 TAC, visit the Dell Force10 website at www.force10networks.com/support