Users Guide

82 | System Specifications
www.dell.com | support.dell.com
E1200i AC System Power Requirements
E1200i DC Chassis Physical Design
E1200i DC System Power Requirements
Parameter Specifications
Nominal Input Voltage 200-240 VAC 50/60 Hz
Maximum Power Consumption 6,634 Watts
Maximum Thermal Output (5,700 W) 19,449 BTU/hour
Maximum Input Current (per power supply) 15.0 A @ 200 VAC
12.5 A @ 240 VAC
Maximum System Power Input 6.0 KVA @ 200/240 VAC
Parameter Specifications
Height 36.75 inches (93.35 cm)
Width 17.40 inches (44.20 cm)
Depth (without cable management system) 21.25 inches (53.98 cm)
Chassis weight with factory-installed components (backplane
and air filter)
97 pounds (approx.) (44.00 kg)
Weight fully loaded (backplane, air filter, 2 fan trays, 10
SFM3s, RPMs, and 14 line cards)
319 pounds (approx.) (144.70 kg)
Mounting Attached rack mount brackets are factory set for front
mounting in a standard 19-inch rack.
Mounting brackets are adjustable for center and rear
mounting.
Optional brackets are available for front or center mounting
in a 23-inch rack or cabinet.
Rack clearance required Front: 18 inches
Rear: 20 inches
Thermal Output
Maximum (fully-loaded chassis with 10-port 10GE line cards) 16,446 BTU/hr
Minimum (chassis with one 10-port 10GE line card) 1,997 BTU/hr
Parameter Specifications
Nominal Input Voltage -44 to -60 VDC
Maximum Power Consumption 5,400 W
Maximum Thermal Output (5,100 W) 17,402 BTU/hour
Maximum Input Current (per DC PEM) 150 A