Command Line Reference Guide

Intermediate System to Intermediate System (IS-IS) | 795
Related
Commands
description
c e s
Enter a description of the IS-IS routing protocol
Syntax
description {description}
To remove the description, use the no description {description} command.
Parameters
Defaults
No default behavior or values
Command Modes
ROUTER ISIS
Command
History
Related
Commands
distance
e
Define the administrative distance for learned routes.
Syntax
distance weight [ip-address mask [prefix-list]]
To return to the default values, enter the no distance weight command.
Parameters
Defaults
weight = 115
Command Modes
ROUTER ISIS (for IPv4)
CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
redistribute Redistribute routes from one routing domain to another routing domain.
isis metric Configure a metric for an interface
metric-style Set the metric style for the router.
show isis database Display the IS-IS link state database.
description
Enter a description to identify the IS-IS protocol (80 characters maximum).
pre-7.7.1.0 Introduced
router isis Enter ROUTER mode on the switch.
weight
The administrative distance value indicates the reliability of a routing information
source.
Range: 1 to 255. (A higher relative value indicates lower reliability. Routes with
smaller values are given preference.)
Default: 115
ip-address mask
(OPTIONAL) Enter an IP address in dotted decimal format and enter a mask in
either dotted decimal or /prefix format.
prefix-list
(OPTIONAL) Enter the name of a prefix list name.