Command Line Reference Guide

IPv6 Border Gateway Protocol (IPv6 BGP) | 753
show ip bgp ipv6 unicast inconsistent-as
c e s
View routes with inconsistent originating Autonomous System (AS) numbers, that is, prefixes that are
announced from the same neighbor AS but with a different AS-Path.
Syntax
show ip bgp ipv6 unicast inconsistent-as
Command Modes
EXEC
EXEC Privilege
Command
History
show ip bgp ipv6 unicast neighbors
c e s
Displays information on IPv6 unicast routes exchanged by BGP neighbors.
Syntax
show ip bgp ipv6 unicast neighbors [ipv4-neighbor-addr | ipv6-neighbor-addr]
[advertised-routes | dampened-routes | detail | flap-statistics | routes | received-routes [network
[network-mask]] | denied-routes [network [network-mask]]]
Parameters
Command Modes
EXEC
EXEC Privilege
Version 8.4.2.1 Introduced on C-Series and S-Series.
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale
ipv6 unicast
Enter the ipv6 unicast keywords to view information only related to IPv6
unicast routes.
ipv4-neighbor-addr |
ipv6-neighbor-addr
(OPTIONAL) Enter the IP address of the neighbor to view only BGP route
information exchanged with that neighbor.
advertised-routes (OPTIONAL) Enter the keywords advertised-routes to view only the routes
the neighbor sent.
dampened-routes (OPTIONAL) Enter the keyword dampened-routes to view information on
dampened routes from the BGP neighbor.
detail (OPTIONAL) Enter the keyword detail to view neighbor-specific internal
information for the IPv4 Unicast address family.
flap-statistics (OPTIONAL) Enter the keyword flap-statistics to view flap statistics on the
neighbor’s routes.
routes (OPTIONAL) Enter the keywords routes to view only the neighbor’s feasible
routes.
received-routes
[network
[
network-mask]
(OPTIONAL) Enter the keywords received-routes followed by either the
network address (in dotted decimal format) or the network mask (in slash prefix
format) to view all information received from neighbors.
Note: neighbor soft-reconfiguration inbound must be configured prior to viewing
all the information received from the neighbors.
denied-routes [network
[
network-mask]
(OPTIONAL) Enter the keywords denied-routes followed by either the network
address (in dotted decimal format) or the network mask (in slash prefix format) to
view all information on routes denied via neighbor inbound filters.