Command Line Reference Guide

1460 | E-Series Debugging and Diagnostics
www.dell.com | support.dell.com
Command
History
Example FTOS#show console lp 0
MINI FIFO CONTROL = 0x0a
MINI FIFO RPM POINTER = 0x000
MINI FIFO CPU POINTER = 0xb0b
Default case. type = 5
frrpaProcessIfmNotif(): Default case. type = 69
frrpaProcessIfmNotif(): Default case. type = 69
frrpaProcessIfmNotif(): Default case. type = 70
frrpaProcessIfmNotif(): Default case. type = 5
frrpaProcessIfmNotif(): Default case. type = 5
frrpaProcessIfmNotif(): Default case. type = 5
frrpaProcessIfmNotif(): Default case. type = 5
frrpaProcessIfmNotif(): Default case. type = 5
frrpaProcessIfmNotif(): Default case. type = 11
frrpaProcessIfmNotif(): Default case. type = 5
frrpaProcessIfmNotif(): Default case. type = 5
frrpaProcessIfmNotif(): Default case. type = 11
FTOS#
reset linecard
e
Reset a specific line card module (power-off and then power-on).
Syntax
reset linecard slot-number
Parameters
Defaults
No default values or behavior.
Command Modes
EXEC Privilege
Command
History
Related
Commands
reset sfm
e
Reset a specific SFM module (power-off and then power-on).
Syntax
reset sfm slot-number
Parameters
Defaults
No default values or behavior.
Command Modes
EXEC Privilege
Version 7.5.1.0 Introduced
slot-number
Enter the slot number of the SFM to reset.
Range: 0 to 6
Version 6.5.4.0 Introduced
power on/off linecard Power on/off a line card
slot-number
Enter the slot number of the SFM to reset.
Range: 0 to 7