Command Line Reference Guide

E-Series ExaScale Debugging and Diagnostics | 1447
show logging driverlog
ces
Display the driver log for the RPM CP processor or for the line card CPU in the specified slot.
Syntax
show logging driverlog [cp | linecard number |stack-unit unit# ]
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
This command displays internal software driver information which may be useful during
troubleshooting line card initialization errors, such as downed Port-Pipe.
cp Enter cp to display the driver log for the Control Processor.
linecard
number (OPTIONAL) Enter the keyword linecard followed by the line card slot number to
display the driver log for the specified line card.
Range: 0 to 13 on a E1200, 0 to 6 on a E600/E600i, and 0 to 5 on an E300, 0 to 7 on a
C300, 0 to 3 on a C150.
stack-unit unit# Enter the keyword stack-unit followed by the stack member ID of the switch for
which you want to display the driver log.
Range: 0 to 11
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i