Command Line Reference Guide

S-Series Stacking Commands | 1333
Example 2
(show system
stack-ports
status)
FTOS# show system stack-ports status
Topology: Ring
Interface Link Speed Admin Link
(Gb/s) Status Status
-------------------------------------------------
0/49 12 up up
0/50 12 up down
0/51 24 up up
1/49 12 up up
1/50 12 up up
2/49 24 up up
2/51 12 up up
2/52 12 up down
FTOS#
Example 3
(show system
stack-ports
topology)
FTOS# show system stack-ports topology
Topology: Ring
Interface Connection
----------------------
0/49 1/49
0/50
0/51 2/49
1/49 0/49
1/50 2/51
2/49 0/51
2/51 1/50
2/52
FTOS#
Related
Commands
Table 58-148. show interfaces description Command Example Fields
Field Description
Topology Lists the topology of stack ports connected: Ring, Daisy chain, or Standalone
Interface The unit/port ID of the connected stack port on this unit
Link Speed Link Speed of the stack port (12 or 24) in Gb/s
Admin Status The only currently listed status is Up.
Connection The stack port ID to which this unit’s stack port is connected
reset stack-unit Reset the designated S-Series stack member.
show hardware stack-unit Display the data plane or management plane input and output statistics of
the designated component of the designated stack member.
show system (S-Series) Display the current status of all stack members or a specific member.
upgrade (S-Series management unit) Upgrade the bootflash image or system image of the S-Series
management unit.