Command Line Reference Guide

1332 | S-Series Stacking Commands
www.dell.com | support.dell.com
Auto reboot Stack-unit: Enabled
Auto failover limit: 3 times in 60 minutes
-- Stack-unit Failover Record --
------------------------------------------------
Failover Count: 0
Last failover timestamp: None
Last failover Reason: None
Last failover type: None
-- Last Data Block Sync Record: --
------------------------------------------------
Line Card Config: succeeded Mar 07 1996 00:27:39
Start-up Config: succeeded Mar 07 1996 00:27:39
Runtime Event Log: succeeded Mar 07 1996 00:27:39
Running Config: succeeded Mar 07 1996 00:27:39
ACL Mgr: succeeded Mar 07 1996 00:27:39
Related
Commands
show system stack-ports
s
Display information about the stacking ports on all switches in the S-Series stack.
Syntax
show system stack-ports [status | topology]
Parameters
Defaults
No default behavior
Command Modes
EXEC
EXEC Privilege
Command
History
Example 1
(show system
stack-ports)
FTOS# show system stack-ports
Topology: Ring
Interface Connection Link Speed Admin Link
(Gb/s) Status Status
----------------------------------------------------------------------------
0/49 1/49 12 up up
0/50 12 up down
0/51 2/49 24 up up
1/49 0/49 12 up up
1/50 2/51 12 up up
2/49 0/51 24 up up
2/51 1/50 12 up up
2/52 12 up down
FTOS#
redundancy disable-auto-reboot Prevent the system from auto-rebooting if it fails.
status (OPTIONAL) Enter the keyword status to display the command output without the Connection field.
topology (OPTIONAL) Enter the keyword topology to limit the table to just the Interface and Connection fields.
Version 7.7.1.0 Introduced on S-Series