Command Line Reference Guide

SONET | 1323
Usage
Information
For peers to successfully negotiate authentication, you must configure a hostname, password, remote
hostname and remote password for PAP authentication.
Related
Commands
scramble-atm
e
Enable POS/SDH payload scrambling on the interface.
Syntax
scramble-atm
To disable scrambling, enter no scramble-atm.
Defaults
Disabled
Command Modes
INTERFACE
Usage
Information
You must either enable payload scrambling or disable scambling on both ends of the link.
show controllers
e
Display troubleshooting information, such as the clock source, SONET alarms and error rates, and
registers values.
Syntax
show controllers interface
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example 1
(show controllers
sonet)
FTOS#show controllers sonet
Interface is SONET 1/2
SECTION
LOF = 0 LOS = 0 BIP(B1) = 0
LINE
AIS = 0 RDI = 0 FEBE = 0 BIP(B2) = 0
ppp authentication Enable CHAP or PAP or both authentication.
ppp pap rem-hostname Configure a remote hostname for PAP authentication.
ppp pap hostname Configure a hostname for PAP authentication.
ppp pap password Configure a password for PAP authentication.
interface
Enter the one of the following interface keywords and slot/port information:
• For a SONET interface, enter the keyword sonet followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed
by the slot/port information.
Version 7.4.2.0 Added support for Ten Gigabit Ethernet