Command Line Reference Guide

SNMP and Syslog | 1293
Command
History
Usage
Information
The following example specifies the group named harig as a version 3 user requiring both
authentication and encryption and read access limited to the read named rview.
Example FTOS#conf
FTOS(conf)# snmp-server group harig 3 priv read rview
FTOS#
Related
Commands
snmp-server host
c e s
Configure the recipient of an SNMP trap operation.
Syntax
snmp-server host ip-address | ipv6-address | host host name [traps | informs] [version 1 | 2c | 3]
[auth | no auth | priv] [community-string] [udp-port port-number] [notification-type]
To remove the SNMP host, use the no snmp-server host ip-address [traps | informs] [version 1 | 2c
| 3] [auth | noauth | priv] [community-string] [udp-port number] [notification-type] command.
Parameters
Version 8.4.1.5
Support added for
context context-name parameter
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
E-Series legacy command
Note: For IPv6 ACLs, only IPv6 and UDP types are valid for SNMP; TCP, ICMP rules are not valid for
SNMP. In IPv6 ACLs port rules are not valid for SNMP.
Note: The number of configurable groups is limited to 16 groups.
show snmp group
Display the group name, security model, view status, and storage type of each group.
show running-config snmp Display the SNMP running configuration
ip-address Enter the keyword host followed by the IP address of the host (configurable hosts
are limited to 16).
ipv6-address Enter the keyword host followed by the IPv6 address of the host in the
x:x:x:x::x format.
The
:: notation specifies successive hexadecimal fields of zero
host
Enter the keyword host followed by the name of the host for destination lookup.
traps
(OPTIONAL) Enter the keyword traps to send trap notifications to the specified host.
Default: traps
informs
(OPTIONAL) Enter the keyword informs to send inform notifications to the specified host.
Default: traps
version 1 | 2c | 3
(OPTIONAL) Enter the keyword version to specify the security model followed
by the security model version number
1, 2c, or 3.
• Version
1 is the least secure version
• Version
3 is the most secure of the security modes.
• Version
2c allows transmission of informs and counter 64, which allows for
integers twice the width of what is normally allowed.
Default: Version
1