Command Line Reference Guide

Security | 1237
dot1x max-eap-req
c e s
Configure the maximum number of times an EAP (Extensive Authentication Protocol) request is
transmitted before the session times out.
Syntax
dot1x max-eap-req number
To return to the default, use the no dot1x max-eap-req command.
Parameters
Defaults
2
Command Modes
INTERFACE
Command
History
Related
Commands
dot1x port-control
c e s
Enable port control on an interface.
Syntax
dot1x port-control {force-authorized | auto | force-unauthorized}
Parameters
Defaults
No default behavior or values
Command Modes
INTERFACE
Command
History
Usage
Information
The authenticator performs authentication only when port-control is set to auto.
number
Enter the number of times an EAP request is transmitted before a session time-out.
Range: 1 to 10
Default: 2
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series
interface range Configure a range of interfaces
force-authorized Enter the keyword force-authorized to forcibly authorize a port.
auto Enter the keyword auto to authorize a port based on the 802.1X operation result.
force-unauthorized Enter the keyword force-unauthorized to forcibly de-authorize a port.
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series