Command Line Reference Guide

1084 | Power over Ethernet (PoE)
www.dell.com | support.dell.com
Table 45-122, "Power Supply Conditions," in Power over Ethernet (PoE) describes the nine possible
power supply conditions.
Table 45-122. Power Supply Conditions
AC Fail The PSU is unplugged.
Active The PSU is supplying power to the chassis.
Fail The PSU has failed.
Not Present The PSU is not installed in the chassis.
Over Current Shutdown The PSU has turned off due to an high input current condition.
Over Temperature Shutdown The PSU has turned off due to an high temperature condition.
Over Temperature Warning The temperature of the PSU is greater than the recommended maximum
operating temperature.
Over Current Warning The current being supplied to the PSU is greater than the recommended
maximum input current.
Power Off The PSU is present but not on.