Command Line Reference Guide

1056 | PIM-Sparse Mode (PIM-SM)
www.dell.com | support.dell.com
show ip pim neighbor
c e s
View PIM neighbors.
Syntax
show ip pim neighbor
Command Modes
EXEC
EXEC Privilege
Command
History
Example FTOS#show ip pim neighbor
Neighbor Interface Uptime/Expires Ver DR
Address Prio/Mode
127.87.3.4 Gi 7/16 09:44:58/00:01:24 v2 1 / S
FTOS#
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Introduced on S-Series
Table 43-114. show ip pim neighbor Command Example Fields
Field Description
Neighbor address Displays the IP address of the PIM neighbor.
Interface List the interface type, with either slot/port information or ID (VLAN or Port Channel), on
which the PIM neighbor was found.
Uptime/expires Displays the amount of time the neighbor has been up followed by the amount of time
until the neighbor is removed from the multicast routing table (that is, until the neighbor
hold time expires).
Ver Displays the PIM version number.
• v2 = PIM version 2
DR prio/Mode Displays the Designated Router priority and the mode.
• 1 = default Designated Router priority (use ip pim dr-priority)
• DR = Designated Router
• S = Sparse mode