Users Guide

dot1p Value in
Incoming Frame
Queue Assignment
6 3
7 3
The following describes the dot1p-priority class group assignment
dot1p Value in
the Incoming
Frame
Priority Group Assignment
0 LAN
1 LAN
2 LAN
3 SAN
4 IPC
5 LAN
6 LAN
7 LAN
The following describes the priority group-bandwidth assignment.
Priority Group
Bandwidth Assignment
IPC 5%
SAN 50%
LAN 45%
PFC and ETS Conguration Command Examples
The following examples show PFC and ETS conguration commands to manage your data center trac.
Example of Conguring QoS Priority-Queue Assignment to Honor Dot1p Priorities
Dell(conf)# service-class dynamic dot1p
Using PFC and ETS to Manage Converged Ethernet Trac in a Switch
Stack
The following example shows how to apply the DCB PFC input policy (ipc_san_lan) and ETS output policy (ets) on all FN IOM
switches in a switch stack.
This example references the PFC and ETS Conguration Examples section.
Example of Applying DCB PFC Input Policy and ETS Output Policy in a Switch Stack
dcb-map stack-unit all stack-ports all <dcb-map-name>
FC Flex IO Modules
1013