Deployment Guide

--------------------
PG:0 TSA:ETS BW:30 PFC:OFF
Priorities:0 1 2 5 6 7
PG:1 TSA:ETS BW:30 PFC:OFF
Priorities:4
PG:2 TSA:ETS BW:40 PFC:ON
Priorities:3
Default FCoE map
Dell(conf)#do show fcoe-map
Fabric Name SAN_FABRIC
Fabric Id 1002
Vlan Id 1002
Vlan priority 3
FC-MAP 0efc00
FKA-ADV-Period 8
Fcf Priority 128
Config-State ACTIVE
Oper-State UP
Members
Fc 0/9
Te 0/4
DCB_MAP_PFC_OFF
Dell(conf)#do show qos dcb-map DCB_MAP_PFC_OFF
-----------------------
State :In-Progress
PfcMode:OFF
--------------------
Dell(conf)#
Enabling Fibre Channel Capability on the Switch
Enable the Fibre Channel capability on an Aggregator that you want to congure as an NPG for the Fibre Channel protocol. When you
enable Fibre Channel capability, FCoE transit with FIP snooping is automatically enabled on all VLANs on the switch, using the default FCoE
transit settings.
1 Enable the Fibre Channel capability on an Aggregator for the Fibre Channel protocol.
CONFIGURATION mode
feature fc
Creating a DCB Map
Congure the priority-based ow control (PFC) and enhanced trac selection (ETS) settings in a DCB map before you apply them on
downstream server-facing ports on an Aggregator.
1 Create a DCB map to specify PFC and ETS settings for groups of dot1p priorities.
CONFIGURATION mode
842
NPIV Proxy Gateway