Concept Guide
• debug ipv6 ospf bfd
• debug ipv6 ospf events
• debug ipv6 ospf packet
• debug ipv6 ospf spf
• default-information originate
• graceful-restart grace-period
• graceful-restart mode
• ipv6 ospf area
• ipv6 ospf authentication
• ipv6 ospf bfd all-neighbors
• ipv6 ospf cost
• ipv6 ospf dead-interval
• ipv6 ospf encryption
• ipv6 ospf graceful-restart helper-reject
• ipv6 ospf hello-interval
• ipv6 ospf priority
• ipv6 router ospf
• maximum-paths
• passive-interface
• redistribute
• router-id
• show crypto ipsec policy
• show crypto ipsec sa ipv6
• show ipv6 ospf database
• show ipv6 ospf interface
• show ipv6 ospf neighbor
• snmp context
• timers spf
OSPFv2 Commands
The Dell Networking implementation of OSPFv2 is based on IETF RFC 2328.
area default-cost
Set the metric for the summary default route the area border router (ABR) generates into the stub area. Use this command on the border
routers at the edge of a stub area.
Syntax
area area-id default-cost cost
To return default values, use the no area area-id default-cost command.
Parameters
area-id Specify the OSPF area in dotted decimal format (A.B.C.D.) or enter a number from zero
(0) to 65535.
cost Species the stub area’s advertised external route metric. The range is from zero (0) to
65535.
920 Open Shortest Path First (OSPFv2 and OSPFv3)