Concept Guide

enable
Enter EXEC Privilege mode or any other privilege level congured. After entering this command, you may need to enter a password.
Syntax
enable [level]
Parameters
level (OPTIONAL) Enter a number for a privilege level of the Dell Networking OS. The range is
from 0 to 15. The default is 15.
Defaults 15
Command Modes EXEC
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information Users entering EXEC Privilege mode or any other congured privilege level can access conguration commands. To
protect against unauthorized access, use the enable password command to congure a password for the
enable command at a specic privilege level. If no privilege level is specied, the default is privilege level 15.
Related Commands enable password — congures a password for the enable command and to access a privilege level.
exec-banner
Enable the display of a text string when the user enters EXEC mode.
Syntax
exec-banner
Defaults Enabled on all lines (if congured, the banner appears).
Command Modes LINE
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information Optionally, use the banner exec command to create a text string that is displayed when you access EXEC
mode. This command toggles that display.
Related Commands
banner exec — congures a banner to display when entering EXEC mode.
line — enables and congures console and virtual terminal lines to the system.
90 Control and Monitoring