Concept Guide

ip vlan-ooding
Enable unicast data trac ooding on VLAN member ports.
Syntax
ip vlan-flooding
To disable, use the no ip vlan-flooding command.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.3(0.0) Introduced on the MXL Switch .
Default Disabled
Usage Information By default this command is disabled. There might be some ARP table entries which are resolved through ARP
packets which had Ethernet MAC SA dierent from MAC information inside the ARP packet. This unicast data
trac ooding occurs only for those packets which use these ARP entries.
866 Microsoft Network Load Balancing