Concept Guide

To return to the default, use the no advertise med guest-voice-signaling {vlan-id
layer2_priority DSCP_value} | {priority-tagged number} command.
Parameters
vlan-id Enter the VLAN ID. The range is from 1 to 4094.
layer2_priority Enter the Layer 2 priority. The range is from 0 to 7.
DSCP_value Enter the DSCP value. The range is from 0 to 63.
priority-tagged
number
Enter the keywords priority-tagged then the Layer 2 priority. The range is from 0 to
7.
Defaults uncongured.
Command Modes CONFIGURATION (conf-lldp)
Supported Modes Full-Switch
Command History
9.9(0.0) Introduced on the FN IOM.
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands
debug lldp interface — debugs LLDP.
show lldp neighbors — displays the LLDP neighbors.
show running-cong lldp — displays the LLDP running conguration.
advertise med location-identication
To advertise a location identier, congure the system.
Syntax
advertise med location-identification {coordinate-based value | civic-based
value | ecs-elin value}
To return to the default, use the no advertise med location-identification {coordinate-
based value | civic-based value | ecs-elin value} command.
Parameters
coordinate-based
value
Enter the keywords coordinate-based then the coordinated based location in
hexadecimal value of 16 bytes.
civic-based value Enter the keywords civic-based then the civic based location in hexadecimal format.
The range is from 6 to 255 bytes.
ecs-elin value Enter the keywords ecs-elin then the Emergency Call Service (ecs) Emergency
Location Identication Number (elin) numeric location string. The range is from 10 to 25
characters.
Defaults uncongured.
Command Modes CONFIGURATION (conf-lldp)
Supported Modes Full-Switch
Command History
9.9(0.0) Introduced on the FN IOM.
Link Layer Discovery Protocol (LLDP) 857