Concept Guide

name
Assign a name to the VLAN.
Syntax
name vlan-name
To remove the name from the VLAN, use the no name command.
Parameters
vlan-name Enter up to 32 characters as the name of the VLAN.
Defaults Not congured.
Command Modes INTERFACE VLAN
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information To display information about a named VLAN, enter the show vlan command with the name parameter or the
show interfaces description command.
Related Commands
description — assigns a descriptive text string to the interface.
interface vlan — congures a VLAN.
show vlan — displays the current VLAN congurations on the switch.
show cong
Display the current conguration of the selected VLAN.
Syntax
show config
Command Modes INTERFACE VLAN
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell(conf-if-vl-100)#show config
!
interface Vlan 1
description a
no ip address
mtu 2500
shutdown
Dell(conf-if-vl-100)#
840 Layer 2