Concept Guide

Parameters
process-id Enter a number that corresponds to the OSPF process ID to be redistributed. The range is
from 1 to 65355.
metric metric-value (OPTIONAL) The value used for the redistributed route. Use a metric value that is
consistent with the destination protocol. The range is from 0 to 16777215. The default is
0.
metric-type
{external | internal}
(OPTIONAL) The external link type associated with the default route advertised into a
routing domain. The two options are:
• external
• internal
level-1 (OPTIONAL) Routes are independently redistributed into IS-IS as Level 1 routes.
level-1-2 (OPTIONAL) Routes are independently redistributed into IS-IS as Level-1-2 routes.
level-2 (OPTIONAL) Routes are independently redistributed into IS-IS as Level 2 routes. This
setting is the default.
match {external |
internal}
(OPTIONAL) The command used for OSPF to route and redistribute into other routing
domains. The values are
• internal
• external
route-map map-
name
map-name is an identier for a congured route map. The route map should lter
imported routes from the source routing protocol to the current routing protocol.
If you do not specify a map-name, all routes are redistributed. If you specify a keyword,
but fail to list route map tags, no routes are imported.
Defaults Refer to Parameters.
Command Modes
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information How a metric value assigned to a redistributed route is advertised depends on how on the conguration of the
metric-style command. If the metric-style command is set for Narrow mode and the metric value in the
redistribute ospf command is set to a number higher than 63, the metric value advertised in LSPs is 63. If
the
metric-style command is set for wide mode, the metric value in the redistribute ospf command is
advertised.
Intermediate System to Intermediate System (IS-IS) 801