Concept Guide

Version Description
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
If you do not congure the default-metric command, in addition to the redistribute command, or there
is no route map to set the metric, the metric for redistributed static and connected is “0”.
To redistribute the default route (0::0/0), congure the neighbor default-originate command.
Related Commands neighbor default-originate — injects the default route.
show ip bgp ipv6 unicast
View the current BGP information.
Syntax
show ip bgp ipv6 unicast [network [network-mask] [longer-prefixes]]
Parameters
network (OPTIONAL) Enter the network address (in dotted decimal format) of the BGP network
to view information only on that network.
network-mask (OPTIONAL) Enter the keywords network mask (in slash prex format) of the BGP
network address.
longer-prexes (OPTIONAL) Enter the keywords longer-prefixes to view all routes with a common
prex.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information When you enable the bgp non-deterministic-med command, the show ip bgp command output for a
BGP route does not list the INACTIVE reason.
show ip bgp ipv6 unicast cluster-list
View BGP neighbors in a specic cluster.
Syntax
show ip bgp ipv6 unicast cluster-list [cluster-id]
Paramters
cluster-id (OPTIONAL) Enter the cluster id in dotted decimal format.
Command Modes
• EXEC
• EXEC Privilege
IPv6 Border Gateway Protocol (IPv6 BGP) 749