Concept Guide

Command Modes ROUTER BGPV6-ADDRESS FAMILY
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information If you apply a route map to a BGP peer or neighbor with the neighbor default-originate command
congured, the software does not apply the set lters in the route map to that BGP peer or neighbor.
neighbor description
Assign a character string describing the neighbor or group of neighbors (peer group).
Syntax
neighbor {ipv6-address | peer-group-name} description text
To delete a description, use the no neighbor {ipv6-address | peer-group-name} description
text command.
Parameters
ipv6-address Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation species successive hexadecimal elds of zeros.
peer-group-name Enter the name of the peer group.
text Enter a continuous text string up to 80 characters.
Defaults Not congured.
Command Modes ROUTER BGP
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
neighbor distribute-list
Distribute BGP information using an established prex list.
Syntax
neighbor {ipv6-address | peer-group-name} distribute-list prefix-list-name {in
| out}
To delete a neighbor distribution list, use the no neighbor {ipv6-address | peer-group-name}
distribute-list prefix-list-name {in | out} command.
Parameters
ipv6-address Enter the IPv6 address in the x:x:x:x::x format.
IPv6 Border Gateway Protocol (IPv6 BGP) 703