Concept Guide

clear ip bgp ipv6 unicast soft
Clear and reapply policies for IPv6 unicast routes without resetting the TCP connection; that is, perform BGP soft reconguration.
Syntax
clear ip bgp {* | as-number | ipv4-neighbor-addr | ipv6-neighbor-addr | peer-
group name} ipv6 unicast soft [in | out]
Parameters
* Clear and reapply policies for all BGP sessions.
as-number Clear and reapply policies for all neighbors belonging to the AS. The range is from 0 to
65535 (2 Byte), from 1 to 4294967295 (4 Byte), or from 0.1 to 0.65535.65535 (Dotted
format).
ipv4-neighbor-addr
| ipv6-neighbor-
addr
Clear and reapply policies for a neighbor.
peer-group name Clear and reapply policies for all BGP routers in the specied peer group.
ipv6 unicast Clear and reapply policies for all IPv6 unicast routes.
in Reapply only inbound policies.
NOTE: If you enter soft, without an in or out option, both inbound and
outbound policies are reset.
out Reapply only outbound policies.
NOTE: If you enter soft, without an in or out option, both inbound and
outbound policies are reset.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
debug ip bgp
Allows you to view all information on BGP, including BGP events, keepalives, notications, and updates.
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name] [in | out]
To disable all BGP debugging, use the no debug ip bgp command.
Parameters
ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format then the prex length in
the /x format. The range is from /0 to /128.
NOTE: The :: notation species successive hexadecimal elds of zeros.
IPv6 Border Gateway Protocol (IPv6 BGP) 693