Concept Guide

multicast (OPTIONAL) Enter the keyword multicast to select the multicast option within the
selected address family. Multicast is supported on IPv4 only.
soft (OPTIONAL) Enter the keyword soft to congure and activate policies without resetting
the BGP TCP session; that is, BGP Soft Reconguration.
NOTE: If you enter clear ip bgp ip6-address soft, both inbound and
outbound policies are reset.
in (OPTIONAL) Enter the keyword in to activate only inbound policies.
out (OPTIONAL) Enter the keyword out to activate only outbound policies.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
clear ip bgp peer-group
Reset a peer-group’s BGP sessions.
Syntax
clear ip bgp peer-group peer-group-name
Parameters
peer-group-name Enter the peer group name to reset the BGP sessions within that peer group.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
clear ip bgp ipv6 dampening
Clear information on route dampening and return suppressed route to active state.
Syntax
clear ip bgp ipv6 unicast dampening [ipv6-address]
Parameters
ipv6-address Enter the IPv6 address in the x:x:x:x::x format then the prex length in the /x format. The
range is from /0 to /128.
NOTE: The :: notation species successive hexadecimal elds of zeros.
Command Modes EXEC Privilege
IPv6 Border Gateway Protocol (IPv6 BGP) 691