Concept Guide

Parameters
ip-address (OPTIONAL) Specify a name of a device or the IP address of the device to view more
detailed information about the route.
mask (OPTIONAL) Specify the network mask of the route. Use this parameter with the IP
address parameter.
longer-prexes (OPTIONAL) Enter the keywords longer-prefixes to view all routes with a common
prex.
list prex-list (OPTIONAL) Enter the keyword list and the name of a congured prex list.
process-id (OPTIONAL) Specify that only OSPF routes with a certain process ID must be displayed.
connected (OPTIONAL) Enter the keyword connected to view only the directly connected routes.
static (OPTIONAL) Enter the keyword static to view only routes congured by the ip
route command.
summary (OPTIONAL) Enter the keyword summary.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information The following describes the show ip route all command in the following example.
Field Description
(undened) Identies the type of route:
• C = connected
• S = static
• R = RIP
• B = BGP
• IN = internal BGP
• EX = external BGP
• LO = Locally Originated
• O = OSPF
• IA = OSPF inter area
• N1 = OSPF NSSA external type 1
• N2 = OSPF NSSA external type 2
• E1 = OSPF external type 1
• E2 = OSPF external type 2
• i = IS-IS
• L1 = IS-IS level-1
• L2 = IS-IS level-2
634 IPv4 Routing