Concept Guide

Field Description
• perm — the entry was manually congured and will not time out
• temp — the entry was learned and will time out after 72 hours of inactivity.
Also included in the ag is an indication of the validity of the route:
• ok — the entry is valid.
• ex — the entry expired.
• ?? — the entry is suspect.
TTL Displays the amount of time until the entry ages out of the cache. For dynamically learned
entries only.
Type Displays IP as the type of entry.
Address Displays the IP addresses assigned to the host.
Example
Dell#show hosts
Default domain is not set
Name/address lookup uses static mappings
Name servers are not set
Host Flags TTL Type Address
-------- ----- ---- ---- -------
ks (perm, OK) - IP 2.2.2.2
4200-1 (perm, OK) - IP 192.68.69.2
1230-3 (perm, OK) - IP 192.68.99.2
ZZr (perm, OK) - IP 192.71.18.2
Z10-3 (perm, OK) - IP 192.71.23.1
Dell#
Related Commands
traceroute — views the DNS resolution.
ip host — congures a host.
show ip cam stack-unit
Display CAM entries.
Syntax
show ip cam stack-unit {0–5} [port-set {pipe-number} | {ip-address mask
[longer-prefixes]| detail | member-info | summary]
Parameters
0–5 Enter the stack-unit ID from 0 to 5
pipe-number Enter the number of the Port-Pipe number. The range is from 0 to 0
ip-address mask
[longer-prexes]
(OPTIONAL) Enter the IP address and mask of a route to CAM entries for that route only.
Enter the keywords longer-prefixes to view routes with a common prex.
detail Enter the keyword detail to display the group index ID used by the ecmp routes in the
CAM.
member-info Enter the keywords member-info to display the group index used by the ecmp, the
number of egress ports (members) for the ecmp, and the port details of each member.
The detail information under member-info gives the MAC address, VLAN ID, and
gateway of every member port of the ecmp.
626 IPv4 Routing