Concept Guide
no-refresh (OPTIONAL) Enter the keywords no-refresh to delete the ARP entry from CAM. Or
use this option with interface or ip ip-address to specify which dynamic ARP
entries you want to delete.
NOTE: Transit trac may not be forwarded during the period when deleted ARP
entries are resolved again and re-installed in CAM. Use this option with extreme
caution.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
clear host
Remove one or all dynamically learned host table entries.
Syntax
clear host name
Parameters
name Enter the name of the host to delete. Enter * to delete all host table entries.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
clear ip b stack-unit
Clear all forwarding information base (FIB) entries in the specied stack unit (use this command with caution, refer to Usage Information.)
Syntax
clear ip fib stack-unit unit-number
Parameters
unit-number Enter the number of the stack unit. The range is from 0 to 5.
Command Modes
EXEC
EXEC Privilege
Supported Modes Full–Switch
606 IPv4 Routing