Concept Guide

To remove the name from the VLAN, use the no name command.
Parameters
vlan-name Enter up to 32 characters as the name of the VLAN.
Defaults Not congured.
Command Modes INTERFACE VLAN
Supported Modes All Modes
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information This CLI applies only to the Default VLAN.
To display information about a named VLAN, enter the show vlan command with the name parameter or the
show interfaces description command.
Related commands default vlan-id —Assigns a descriptive text string to the interface.
interface vlan — Congures a VLAN.
show vlan — Displays the current VLAN congurations on the switch.
show cong (INTERFACE mode)
Displays the interface conguration.
Syntax
show config
Command Modes INTERFACE
Supported Modes All Modes
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Example
show cong (from INTERFACE VLAN mode)
Displays the current conguration of the Default VLAN.
Syntax
show config
Command Modes INTERFACE VLAN
Supported Modes All Modes
Interfaces 595