Concept Guide

Total number of devices = 2
Intf# Domain FC-ID Enode-WWPN Enode-WWNN
9 2 02:09:00 32:11:0e:fc:00:00:00:88 22:11:0e:fc:00:00:00:88
11 2 02:0b:00 31:11:0e:fc:00:00:00:77 21:11:0e:fc:00:00:00:77
Dell#
show fc switch
Display the switch conguration for Fibre Channel capability.
Syntax
show fc switch
Parameters None
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.7(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
9.0(1.3) Introduced on the S5000.
Usage Information
The following table describes the show fc switch output shown in the following example.
Switch Mode Fibre Channel mode of operation of an FN IOM switch.
Switch WWN Factory-assigned worldwide node (WWN) name of the MXL. The MXL WWN name is not
user-congurable.
Example
Dell(conf)#do show fc switch
Switch Mode : FPORT
Switch WWN : 10:00:aa:00:00:00:00:ac
Dell(conf)#
show fc zoneset
Display the congured and active zoneset.
Syntax
show fc zoneset [ zoneset_name | active ]
Parameters
zoneset_name Enter the zoneset name to display the zoneset name
active Enter the keyword active to display the active zonesets.
merged Enter the keyword merged to display the merge active zones.
Command Modes
• EXEC
FC FLEXIO FPORT 483