Concept Guide

0x1f58ad6c 82 46 209:209 209:41528
0x1c6e2064 83 2 209:777 209:40832
0x1f588ecc 85 570 209:209 209:40832
0x1f57cc0c 98 2 209:209 209:21226 286:3031 13646:1044 13646:1124
13646:1154 13646:1164 13646:1184 13646:1194 13646:1204 13646:1214 13646:1224
13646:1234 13646:1244 13646:1254 13646:1264 13646:3000
0x1d65b2ac 117 6 209:209 209:999 209:31272
0x1f5854ac 119 18 209:209 209:21226 286:108 286:111 286:777 286:3033
517:5104
show ip bgp peer-group
Allows you to view information on the BGP peers in a peer group.
Syntax
show ip bgp [ipv4 unicast] peer-group [peer-group-name [detail | summary]]
Parameters
ipv4 unicast (OPTIONAL) Enter the keywords ipv4 unicast to view information only related to
ipv4 unicast routes.
peer-group-name (OPTIONAL) Enter the name of a peer group to view information about that peer group
only.
detail (OPTIONAL) Enter the keyword detail to view detailed status information of the peers
in that peer group.
summary (OPTIONAL) Enter the keyword summary to view status information of the peers in that
peer group. The output is the same as that found in the show ip bgp summary
command.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
The following describes the show ip bgp peer-group command shown in the following example.
Line beginning
with:
Description
Peer-group Displays the peer group’s name.
Administratively
shut
Displays the peer group’s status if the peer group is not enabled. If you enable the peer
group, this line is not displayed.
BGP version Displays the BGP version supported.
Minimum time Displays the time interval between BGP advertisements.
For address family Displays IPv4 Unicast as the address family.
BGP neighbor Displays the name of the BGP neighbor.
Number of peers Displays the number of peers currently congured for this peer group.
360 Border Gateway Protocol IPv4 (BGPv4)