Concept Guide

community-list
community-list-
name
(OPTIONAL) Enter the keyword community-list then the community–list–name to
display the routes matching the community–list.
dampened-paths (OPTIONAL) Enter the keyword dampened-paths to display the paths suppressed due
to dampening.
extcommunity-list
list name
(OPTIONAL) Enter the keyword extcommunity-list then the list name to display the
routes matching the extended community-list.
lter-list as-path-
name
(OPTIONAL) Enter the keyword filter-list then the as-path-name to display the
routes conforming to the lter–list.
ap–statistics (OPTIONAL) Enter the keyword flap-statistics to display ap statistics of the
routes.
neighbors (OPTIONAL) Enter the keyword neighbors to display the detailed information on TCP
and BGP neighbor connections.
neighbors [all
{received-routes}]
(OPTIONAL) Enter the keyword neighbors [all {received-routes}] to
display all the received routes both accepted and rejected from all the IPv4 or IPv6
neighbors.
next-hop (OPTIONAL) Enter the keyword next-hop to view all the next-hop information on the
learnt routes.
paths (OPTIONAL) Enter the keyword paths to view the BGP path attributes in the BGP
database.
peer-group peer-
group-name
(OPTIONAL) Enter the keyword peer-group then the peer–group–name to view the
information on the BGP peers in a peer group.
regexp regular-
expression
(OPTIONAL) Enter the keyword regexp then the regular expressions to display BGP
information based on a regular expression.
summary (OPTIONAL) Enter the keyword summary to display the summary of BGP neighbor
status.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.14(0.0) Introduced the [all {received-routes}] option for IPv4 and IPv6 neighbors.
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information When you enable the bgp non-deterministic-med command, the show ip bgp command output for a
BGP route does not list the INACTIVE reason.
The following describes the show ip bgp command shown in the following example.
Field Description
Network Displays the destination network prex of each BGP route.
340 Border Gateway Protocol IPv4 (BGPv4)