Concept Guide

Related Commands
capture bgp-pdu max-buer-size — species a size for the capture buer.
show capture bgp-pdu neighbor — displays BGP packet capture information.
capture bgp-pdu max-buer-size
Set the size of the BGP packet capture buer. This buer size pertains to both IPv4 and IPv6 addresses.
Syntax
capture bgp-pdu max-buffer-size 100-102400000
Parameters
100-102400000 Enter a size for the capture buer.
Defaults 40960000 bytes.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands
capture bgp-pdu neighbor — enables capture of an IPv4 BGP neighbor packet.
show capture bgp-pdu neighbor — displays BGP packet capture information for an IPv6 address.
clear ip bgp
Reset BGP sessions. The soft parameter (BGP Soft Reconguration) clears the policies without resetting the TCP connection.
Syntax
clear ip bgp * | as-number | ip-address [flap-statistics | soft [in | out]]
Parameters
* Enter an asterisk ( * ) to reset all BGP sessions.
as-number Enter the AS number to reset all neighbors belonging to that AS. The range is from 0 to
65535 (2 byte), from 1 to 4294967295 (4 byte), or from 0.1 to 65535.65535 (dotted
format).
ip-address Enter an IP address in dotted decimal format to reset all prexes from that neighbor.
ap-statistics (OPTIONAL) Enter the keyword flap-statistics to reset the ap statistics on all
prexes from that neighbor.
soft (OPTIONAL) Enter the keyword soft to congure and activate policies without resetting
the BGP TCP session, that is, BGP Soft Reconguration.
NOTE: If you enter the clear ip bgp ip-address soft command, both
inbound and outbound policies are reset.
in (OPTIONAL) Enter the keyword in to activate only inbound policies.
out (OPTIONAL) Enter the keyword out to activate only outbound policies.
Border Gateway Protocol IPv4 (BGPv4) 307