Concept Guide

9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The given password is encrypted by the system and the show config displays an encrypted text string for any
of the encrypted typed used.
clear counters vrrp
Clear the counters maintained on VRRP operations.
Syntax
clear counters vrrp [vrrp-id]
Parameters
vrrp-id (OPTIONAL) Enter the number of the VRRP group ID. The range is from 1 to 255.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
NOTE: This command also enables you to clear the port congurations corresponding to a range of
ports.
• You can specify multiple ports as slot/port-range. For example, if you want to clear the port congurations
corresponding to all ports between 1 and 4, specify the port range as clear counters interfaces
interface-type 1/1 - 4.
debug vrrp
Allows you to enable debugging of VRRP.
Syntax
debug vrrp interface [vrrp-id] {all | packets | state | timer}
To disable debugging, use the no debug vrrp interface [vrrp-id] {all | packets | state |
timer} command.
Parameters
interface Enter the following keywords and slot/port or number information
• For Port Channel interface types, enter the keywords port-channel then the
number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
•
For a VLAN interface, enter the keyword vlan then the VLAN ID. The VLAN ID range
is from 1 to 4094.
vrrp-id (OPTIONAL) Enter a number from 1 to 255 as the VRRP group ID.
all Enter the keyword all to enable debugging of all VRRP groups.
Virtual Router Redundancy Protocol (VRRP) 1383