Concept Guide

system-mac

Recongure the default MAC address for the domain.

Syntax

system-mac mac-address

Parameters

mac-address Enter the system MAC address for the VLT domain.

Defaults Not congured.

Command Modes VLT DOMAIN

Supported Modes Programmable-Mux (PMUX)

Full–Switch

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.4(0.0) Supported on the FN I/O Aggregator.

9.2(0.0) Supported on the M I/O Aggregator.

Usage Information

When you create a VLT domain on a switch, Dell Networking OS automatically creates a VLT-system MAC address

used for internal system operations.

To recongure the default MAC address for the domain by entering a new MAC address in the format

nn:nn:nn:nn:nn:nn, use the system-mac command.

You must also recongure the same MAC address on the VLT peer switch.

unit-id

Explicitly congure the default unit ID of a VLT peer switch.

Syntax

unit-id [0 | 1]

Parameters

0 | 1 Congure the default unit ID of a VLT peer switch. Enter 0 for the rst peer or enter 1 for

the second peer.

Defaults Automatically assigned based on the MAC address of each VLT peer. The peer with the lower MAC address is