Concept Guide

0/10 1/10 10 up up
1/9 10 up down
1/10 0/10 10 up up
Dell#
Example (Status)
Dell# show system stack-ports status
Topology: Daisy chain
Interface Link Speed Admin Link Trunk
(Gb/s) Status Status Group
0/9 10 up down
0/10 10 up up
1/9 10 up down
1/10 10 up up
Example (Topology)
Dell# show system stack-ports topology
Topology: Daisy chain
Interface Connection Trunk
Group
0/9
0/9 1/10
1/10
1/10 0/10
Dell #
Related Commands
power-cycle stack-unit—resets the designated stack member.
show diag— displays the data plane or management plane input and output statistics of the designated
component of the designated stack member.
show system—displays the current status of all stack members or a specic member.
show system stack-unit iom-mode
Displays the current iom-mode (stack/standalone) and the mode congured after next reboot.
Syntax
show system stack-unit unit-number iom-mode
Parameters
unit number <0–5> Enter the number of the member stack unit. The range is from 0 to 5.
Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.6.(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage information This command is supported on the M I/O, FN410S, and FN410T Aggregators
Example
Dell#show system stack-unit all iom-mode ?
| Pipe through a command
<cr>
Dell#show system stack-unit all iom-mode
1270 Stacking Commands