Concept Guide

size (OPTIONAL) Indicate the size, in bytes, of the logging buer. The number of messages
buered depends on the size of each message. The range is from 40960 to 524288. The
default is 40960 bytes.
Defaults level = 7; size = 40960 bytes
Command Modes CONFIGURATION
Supported Modes Full–Switch Mode
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information When you decrease the buer size, all messages stored in the buer are lost. Increasing the buer size does not
aect messages stored in the buer.
Related Commands
clear logging — clears the logging buer.
default logging buered — returns the logging buered parameters to the default setting.
show logging — displays the logging setting and system messages in the internal buer.
logging console
Specify which messages are logged to the console.
Syntax
logging console [level]
To return to the default values, use the default logging console command.
To disable logging to the console, use the no logging console command.
Parameters
level (OPTIONAL) Indicate a value from 0 to 7 or enter one of the following parameters:
emergencies, alerts, critical, errors, warnings, notifications,
informational, or debugging. The default is 7 or debugging.
Defaults level = 7; size = debugging
Command Modes CONFIGURATION
Supported Modes Full–Switch Mode
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands
clear logging — clears the logging buer.
default logging console — returns the logging console parameters to the default setting.
Simple Network Management Protocol (SNMP) and Syslog 1255