Concept Guide

When you enabled RBAC and extended logging:
• Only the system administrator role can execute this command.
• The system administrator and system security administrator roles can view security events and system events.
• The system administrator role can view audit, security, and system events.
• The network administrator and network operator roles can view system events.
Examples
Dell(conf)#logging extended
Related Commands show logging auditlog — displays audit log, clear logging auditlog — clears audit log
default logging monitor
Return to the default settings for messages logged to the terminal.
Syntax
default logging monitor
Defaults level = 7 or debugging
Command Modes CONFIGURATION
Supported Modes Full–Switch Mode
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands
logging monitor — sets the logging monitor parameters.
terminal monitor — sends system messages to the terminal/monitor.
default logging trap
Return to the default settings for logging messages to the Syslog servers.
Syntax
default logging trap
Defaults level = 6 or informational
Command Modes CONFIGURATION
Supported Modes Full–Switch Mode
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands logging trap — limit messages logged to the Syslog servers based on severity.
Simple Network Management Protocol (SNMP) and Syslog 1253