Concept Guide

Version Description
9.3(0.0) Added support for the AES128-CFB encryption algorithm on the MXL 10/40GbE Switch
IO Module platform
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information To enable robust, eective protection and security for SNMP packets transferred between the server and the
client, you can use the snmp-server user username group groupname 3 auth
authentication-type auth-password priv aes128 priv-password to specify that AES128-CFB
encryption algorithm needs to be used.
You cannot modify the FIPS mode if SNMPv3 users are already congured and present in the system. An error
message is displayed if you attempt to change the FIPS mode by using the fips mode enable command in
Global Conguration mode. You can enable or disable FIPS mode only if SNMPv3 users are not previously set up.
Otherwise, you must remove the previously congured users before you change the FIPS mode.
Example
Dell# snmp-server user privuser v3group v3 encrypted auth md5
9fc53d9d908118b2804fe80e3ba8763d priv aes128 d0452401a8c3ce42804fe80e3ba8763d
Related Commands show snmp user — Displays the information congured on each SNMP user name.
snmp-server view
Congure an SNMPv3 view.
Syntax
snmp-server view view-name oid-tree {included | excluded}
To remove an SNMPv3 view, use the no snmp-server view view-name oid-tree {included |
excluded} command.
Parameters
view-name Enter the name of the view (not to exceed 20 characters).
oid-tree Enter the OID sub tree for the view (not to exceed 20 characters).
included (OPTIONAL) Enter the keyword included to include the MIB family in the view.
excluded (OPTIONAL) Enter the keyword excluded to exclude the MIB family in the view.
Defaults none
Command Modes CONFIGURATION
Supported Modes Full–Switch Mode
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The oid-tree variable is a full sub-tree starting from 1.3.6 and cannot specify the name of a sub-tree or a MIB.
The following Example congures a view named rview that allows access to all objects under 1.3.6.1.
Example
Dell#(conf) snmp-server view rview 1.3.6.1 included
Related Commands show running-cong — displays the SNMP running conguration.
1250 Simple Network Management Protocol (SNMP) and Syslog