Concept Guide
snmp context
Enables you to map a BGP VRF instance within an SNMP context through community mapping in SNMPv2c and SNMPv3.
Syntax
[no] snmp context [context name]
Parameters
context name
Enter a unique name for the context.
Defaults None
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.14.1.0 Introduced on S4810 and S4820T.
9.13(0.0) Introduced on all DNOS platforms.
Usage Information
Use this command to map SNMP context to a VRF instance within a community in SNMPv2c and SNMPv3. The
no version of this command turns o this feature.
snmp context
Congure SNMPv3 context name to map multiple OSPFv3 VRF instances.
Syntax
snmp context {context-name}
To clear snmp context, use the no snmp context {context-name} command.
Parameters
context-name Enter the SNMP context name. The maximum length is 32 alphanumeric characters.
Defaults None.
Command Modes IPv6 ROUTER OSPF
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.14(1.0) Introduced on the S3100 series, S3048–ON, S4048–ON, S4048T-ON, S5048F-ON,
S6000, S6010–ON, S6100–ON, Z9100–ON, Z9500, S6000–ON, C9010, MXL, and FN
IOM.
Usage Information
Use SNMPv3 context conguration to distinguish between various OSPFv3 VRF instances.
Simple Network Management Protocol (SNMP) and Syslog 1237