Concept Guide

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the FN IOM.
9.5(0.0) Introduced on the MXL.
Example
Dell(conf)#clear logging auditlog
Related Commands show logging auditlog — displays audit log
show snmp
Display the status of SNMP network elements.
Syntax
show snmp
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch Mode
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show snmp
32685 SNMP packets input
0 Bad SNMP version errors
0 Unknown community name
0 Illegal operation for community name supplied
0 Encoding errors
96988 Number of requested variables
0 Number of altered variables
31681 Get-request PDUs
968 Get-next PDUs
0 Set-request PDUs
61727 SNMP packets output
0 Too big errors (Maximum packet size 1500)
9 No such name errors
0 Bad values errors
0 General errors
32649 Response PDUs
29078 Trap PDUs
Dell#
Related Commands snmp-server community — enables the SNMP and set community string.
show snmp engineID
Display the identication of the local SNMP engine and all remote engines that are congured on the router.
Syntax
show snmp engineID
Simple Network Management Protocol (SNMP) and Syslog 1233